Main Sewer Connections
Get Intouch For Free Advice for the best way to connect your property to the main drains. Residential or Comercial we can help you from start to finish with the process.
Main Sewer Connections
Lanson Civils specialises in Sewer connection installation for both foul sewers and surface water sewers tailored to your requirements. We provide a "under one roof" service from planning to permits, traffic management (if required) and a high quality completed job from our qualified team. We do Domestic and Comercail sewr connections If you have land with planing permision that isn't connected to the main sewer please get intouch and we will help from start to finish.
Below are a few examples of projects completed by Lanson Civils
For a hassle free quote or questions please dont hesitate to contact us!
Type s106 Type B Manhole Sewer Connection
Sheffield City Centre
This was a 3.8 metre deep sewer connection for a new build site of 40 houses. We installed a 1200mm diameter type s106 manhole within the high way and a demarcation manhole with in the land of the new site prior to the building works starting.
225mm Junction Connection with 1200mm Demarcation Manhole
Coventry
Here we installed a 225mm junction connection to the main sewer at 3 metres deep with a 1200mm demarcation manhole for a commercial unit.
Main Sewer Connections
Here’s how the process works.
Get intouch with Lanson Civils. A engineer will arrarange a time and date convieniet for a site visit and do the following steps towards getting you connected.
1. Check for a Nearby Public Sewer
The first step is confirming that a public sewer is available near your property. Sewer maps can be obtained from your regional water company, such as Thames Water, Severn Trent, or Anglian Water.
2. Drainage Survey
A drainage contractor will inspect the site to determine:
Where the sewer is located
The depth of the sewer
The best point to connect
Whether gravity drainage or a pump is needed
3. Submit a Sewer Connection Application
Before work starts, a Section 106 sewer connection application must be submitted to the water authority. This includes drainage drawings and details of the proposed connection.
4. Approval from the Water Company
Once approved, the water company will confirm the connection method, pipe size, and installation requirements.
5. Excavation and Sewer Connection
A qualified contractor will then:
Excavate to the public sewer
Install new underground drainage pipes
Connect the property drain to the main sewer
Install inspection chambers if required
6. Inspection and Completion
The water company may inspect the work before it is covered. Once approved, the trench is backfilled and the area is fully reinstated.
Your property will then be officially connected to the public sewer network.
Contact us
Telephone: 07549908145
E-mail: Info@lansoncivilslimited.co.uk
Address: 1 Davies Yard, Barnsley, South Yorkshire, Uk